I used one from a Nissan Maxima, 94-99, got it from some forum.
NAPA - Outer tie rod - (NCP) 269-3103 - 45$ (each, Maxima 94-99)
You can cross reference a bunch of stuff here at nissan4u.com/parts/sunny and in particular for tie rods look at this: tie rods. It says it doesn't match any other models but I used the maxima part no problem.
ok cool thanks. most often i have found in my career as a mechanic is that sometimes they say a part wont work cuz the part number is not the same but it can be very small unimportant differences that make it that way. i heard alot of maxima stuff works on these cars. thank you!!
I also used the maxima part. It works. AFAIK there are no known matches for the inners, but the pulsar. That said there HAS to be a part that works, it's just a matter of who wants to trial and error till they find one.
That sucks. I almost ordered the pulsar ones from the dealer but thought I'd take mine out first and go to a parts store and compare a few to see if I get lucky. Ended up costing $45/ea for the maxima ones. Don't forget to invest in a new boot kit.
lol I was just about to rebuild a spare steering rack with new inner and outer ends.. you saved me like a 100 bucks! Is the boot kit for the 94 maxima adaptable also?
Mine isn't bigger than yours.. I just like to drive
I confirm the inner tie rod for maxima 95 a32 dont fit in the gtir the rods are too much longer i cant fix the toe so im thinking the inner tie rod of the 94 j30 fits ? lol i spend to much time so i buy the nissan gtir oem to be shure
ok here it is. 95 maxima outer tie rod works, 95 maxima steering rack boots work,and after I take my 95 maxima inners back, Im going to pick up a 94 maxima inner tie rod end up, cause Matt_GTIR said they work for sure.
ok here it is. 95 maxima outer tie rod works, 95 maxima steering rack boots work,and after I take my 95 maxima inners back, Im going to pick up a 94 maxima inner tie rod end up, cause Matt_GTIR said they work for sure.
ok here it is. 95 maxima outer tie rod works, 95 maxima steering rack boots work,and after I take my 95 maxima inners back, Im going to pick up a 94 maxima inner tie rod end up, cause Matt_GTIR said they work for sure.
I used one from a Nissan Maxima, 94-99, got it from some forum.
NAPA - Outer tie rod - (NCP) 269-3103 - 45$ (each, Maxima 94-99)
You can cross reference a bunch of stuff here at nissan4u.com/parts/sunny and in particular for tie rods look at this:
tie rods. It says it doesn't match any other models but I used the maxima part no problem.
ok cool thanks. most often i have found in my career as a mechanic is that sometimes they say a part wont work cuz the part number is not the same but it can be very small unimportant differences that make it that way. i heard alot of maxima stuff works on these cars. thank you!!
Wow thanks for this post!
I just ordered mine!
Mine isn't bigger than yours.. I just like to drive
Anyone replace their inner tie rods? Any crossover with other cars?
I also used the maxima part. It works. AFAIK there are no known matches for the inners, but the pulsar. That said there HAS to be a part that works, it's just a matter of who wants to trial and error till they find one.
I just changed my inner tie rods. I used '94 maxima inners and I can confirm they work.
1992 nissan pulsar gti-r Black sold/1993 red/rusty parts car /1990 nissan pulsar gtir fully built vet with to much jam
That sucks. I almost ordered the pulsar ones from the dealer but thought I'd take mine out first and go to a parts store and compare a few to see if I get lucky. Ended up costing $45/ea for the maxima ones. Don't forget to invest in a new boot kit.
SWEEET INFO AGAIN!!
lol I was just about to rebuild a spare steering rack with new inner and outer ends.. you saved me like a 100 bucks! Is the boot kit for the 94 maxima adaptable also?
Mine isn't bigger than yours.. I just like to drive
Not sure on the boots, I had to find them separately so I used boots my buddy had lying around for his skyline.
just to clarify is that j30 inners or a32 inners? they changed over in mid 94.
The boot kit for maxima fit ? And is that j30 inners or a32 inners?
boot kit fits, a32 inners
I confirm the inner tie rod for maxima 95 a32 dont fit in the gtir the rods are too much longer i cant fix the toe so im thinking the inner tie rod of the 94 j30 fits ? lol i spend to much time so i buy the nissan gtir oem to be shure
Where did you find oem ones?
At my local Nissan shop they can have all the part for the nissan
jdm cars
ok but a question.. they fit on steering rack??? they screw ?
Yes they screw in the steering rack. But the rod are too much long so you dont gonna be able to adjust the toe.
hmmm so for sure the a32 do NOT work?
ok here it is. 95 maxima outer tie rod works, 95 maxima steering rack boots work,and after I take my 95 maxima inners back, Im going to pick up a 94 maxima inner tie rod end up, cause Matt_GTIR said they work for sure.
ok here it is. 95 maxima outer tie rod works, 95 maxima steering rack boots work,and after I take my 95 maxima inners back, Im going to pick up a 94 maxima inner tie rod end up, cause Matt_GTIR said they work for sure.
ok here it is. 95 maxima outer tie rod works, 95 maxima steering rack boots work,and after I take my 95 maxima inners back, Im going to pick up a 94 maxima inner tie rod end up, cause Matt_GTIR said they work for sure.
Any updates on the 94 maxima inners working? (sorry for resurrecting this dead thread)
4852160Y05 is the oem part #
according to the internet the part also references to the p11 infiniti g20, or a b15 sentra