just looking for the part number for the front wheel bearing, which should be the same as b13 sentras, correct? also, is it okay to just use my old hubs?
Here you go : http://www.nissanpartsdeal.com/parts/nissan-bearing-assy-front-wheel~40210-50y00.html
By the way they use the same wheel bearing for the 4 wheels.
About the hubs, inspect them for scuff or deep marks and check if they are the same diameter for the whole length of the shaft. If necessary to change it, last time i used a hub from a b13 sentra from a junkyard, GA16DE or SR20 it doesnt matter as they are the same.
recently did mine. if the hubs press in loose you can still re-use them, but will need to make indents with a punch all the way around until they press in properly.
Here you go : http://www.nissanpartsdeal.com/parts/nissan-bearing-assy-front-wheel~40210-50y00.html
By the way they use the same wheel bearing for the 4 wheels.
About the hubs, inspect them for scuff or deep marks and check if they are the same diameter for the whole length of the shaft. If necessary to change it, last time i used a hub from a b13 sentra from a junkyard, GA16DE or SR20 it doesnt matter as they are the same.
recently did mine. if the hubs press in loose you can still re-use them, but will need to make indents with a punch all the way around until they press in properly.