Hey guys!
I need to know if there's a kit available to eliminate the A/C compressor pulley and make sure the alternator can tight a shorter belt?! Does anyone have done this before?!
At thi moment I still have this pulley with the half of the compressor cut in half to let pass my new exhaust (3inch) and make sure my alternator belt can be tighten, but I want to eliminate the pulley of the compressor.
Please let me know if there's a way to do this :)
M4r1n
just use a belt with 825-830mm of length, that's what i use
What he said! I just got a belt for a b13 sentra with no a/c.
And we can still bind this belt well?! I'll go buy one and check this,
Thanks Pulsar666 and Wdeltor!!!
I am running a sentra 2001 sr20 100 amp alternator with a 6 ribs 825mm belt, complete a/c delete and never had a problem. you might have to remove the adjustment bolt and the a/c compressor so the alternator can go lower so the belt pass the pulley, that's all
just use a non a/c belt off an nx2000
Nick do you have a part number?! Or something so I'll be able to make research with my local parts distributor?!
i think its this one 1192077A00TM
just a 91-94 sentra se-r 2.0
or nx2000 without aircon
your parts distributor should be able to look it up just by the vehicle
you will get a belt with 4 ribs with that. if you want the 6 ribs ask for it at your local parts store
Thanks guys!!!
4 ribs is plenty, over 6 yrs on my belt and 100,000km's and autox duty.. so its not that big a deal
Bought a 331mm belt with 6 ribs, I'll let you know how it goes!
you mean 33.1 inch. I have a friend that tried it on his sentra 2001 sr20de and he wasn't able to tight it enough. 33.0 inch is the way to go.
Your are right!
I'm on the limit of the adjustment.
If I see it it's not enough, I'll get a new belt.